2006-0606.IEEE 802.16e WiMAX OFDMA Signal Measurements and

Read or Download 2006-0606.IEEE 802.16e WiMAX OFDMA Signal Measurements and Troubleshooting- Agilent PDF

Best measurements books

Measures and Probabilities

This e-book is meant to be an introductory, but subtle, therapy of degree idea. it may supply an in-depth reference for the practising mathematician. it truly is was hoping that complex scholars in addition to teachers will locate it invaluable. the 1st a part of the e-book should still turn out beneficial to either analysts and probabilists.

Millimeter-Wave Waveguides

Millimeter-Wave Waveguides is a monograph dedicated to open waveguides for millimeter wave purposes. within the first chapters, normal waveguide conception is gifted (with the emphasis on millimeter wave applications). subsequent, the e-book systematically describes the result of either theoretical and experimental reviews of oblong dielectric rod waveguides with excessive dielectric permittivities.

Studies with a Liquid Argon Time Projection Chamber: Addressing Technological Challenges of Large-Scale Detectors

Michael Schenk evaluates new applied sciences and techniques, similar to cryogenic read-out electronics and a UV laser approach, constructed to optimise the functionality of huge liquid argon time projection chambers (LArTPC). among others, the writer experiences the uniformity of the electrical box produced by way of a Greinacher high-voltage generator working at cryogenic temperatures, measures the linear strength move (LET) of muons and the longitudinal diffusion coefficient of electrons in liquid argon.

Extra resources for 2006-0606.IEEE 802.16e WiMAX OFDMA Signal Measurements and Troubleshooting- Agilent

Sample text

Therefore, many of the OFDM subcarriers are not used for this burst and could be used for other bursts. In the constellation display of Figure 18, the signal (or lack of signal) from the unused subcarriers is shown by symbol states and a symbol target at the center of the constellation diagram. Indeed, the ideal location for the symbols associated with unused OFDM subcarriers is the exact center of the constellation diagram, signifying that no power is transmitted on these unused subcarriers and their associated logical subchannels.

Note that only 16QAM modulation now shows in the constellation display (along with the BPSK pilots). Your display should be similar to Figure 24, where traces B and C have been changed to error vector time and error vector spectrum, respectively. You will see from the error vector time display that only 4 symbols are being analyzed, and from the error vector spectrum display you will see that only a portion of the OFDM subcarriers are being used for the selected data burst. The OFDM subcarrier population may be viewed in greater detail by using the Select Area marker tool (chosen from the marker toolbar or by selecting Markers > Tools > Select Area) and X-axis scaling the error vector spectrum trace, focusing on perhaps the center 20% of the trace, by drawing a box and clicking Scale X.

Thus, you only need to create the signal definition once. The second way is to use the Zone Definition Grid. The Zone Definition Grid is a dynamic graphical user interface used to create uplink and downlink zone definitions. ) and then use the mouse to map the data burst region within the zone area of the Zone Definition Grid. When you have defined all the data bursts for the zone, you can save the completed zone definition to a map file. The third way is to use a Map File. omf extension) to simplify making measurements of frequently used signals.

Download PDF sample

Rated 4.01 of 5 – based on 44 votes